We'll connect you with nearby partnered installers who know this exact setup.

Rhino Rack

Rhino-Rack Heavy Duty Roof Rack for Naked Roofs - Aluminum - Black - Qty 2

Part Number: RR59BP

18116 Reviews

In Stock

$669.96

Confirmed to Fit

2016 GMC Canyon

Crew Cab

Extended Cab

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

rhino rack roof crossbar rhino-rack heavy duty for naked roofs - aluminum black qty 2

rhino rack roof crossbar square bars rhino-rack heavy duty for naked roofs - aluminum black qty 2

Show All (14) Product Images

Show Fewer Product Images

Customer Photos

Rhino-Rack Heavy Duty Roof Rack for Naked Roofs - Aluminum - Black - Qty 2 customer photo

Show All (26) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars have top channels for mounting Rhino-Rack contractor-grade accessories. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Rhino Rack. Rhino-Rack Heavy Duty Roof Rack for Naked Roofs - Aluminum - Black - Qty 2 part number RR59BP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (18116)
Q & A (0)
Related Parts
Photos

Rhino Rack Roof Rack - RR59BP

Highlights

Designed to Fit Your 2016 GMC Canyon: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 Heavy Duty crossbars, (4) 2500 Series legs, and a custom fit kit for your vehicle’s naked roof.
Strong Load Capacity: Supports up to 220 lbs for kayaks, canoes, or gear—ideal for travel and hauling.
Versatile Mounting Channels: Top channels fit Rhino-Rack Heavy Duty accessories like ladder rollers, load stops, and eyebolts.
Durable Aluminum Build: Black, heavy-duty aluminum bars resist corrosion and provide long-term stability.
Secure Installation: Lockable cover plates on the legs help keep the rack firmly attached and deter tampering.

Features to know about

Carry Heavy Loads with Confidence: Strong Aluminum Crossbars

When you’re hauling gear for a trip, strength and stability matter most. These heavy-duty aluminum crossbars are built for serious use, supporting up to 220 lbs while staying solid under load. Whether you’re securing lumber, tents, or watercraft, the sturdy construction gives you the confidence to travel without worry.

Keep Your Gear Steady and Protected: Slip-Resistant Channel Design

The top channels on the square bars hold your Rhino-Rack Heavy Duty accessories securely in place. Rubber strips line the channels to cushion your cargo and add slip resistance, keeping things steady even on rough roads. You can mount ladder rollers, load stops, eyebolts, and other contractor-grade gear using the same system.

Secure Your Setup: Lockable Leg Covers

Once everything’s loaded up, the lockable cover plates on the legs keep your rack safely attached. It’s a reassuring touch that prevents tampering and keeps your setup right where it belongs through all your travels.

Fit What You Need for Every Trip: Complete Roof Rack System

This kit includes two 54" long square crossbars, four 2500 Series legs, and a custom fit kit for easy installation on a naked roof. The setup provides the solid foundation you need for cargo boxes, kayaks, or outdoor equipment without extra hardware or guesswork.

Built to Last: Long-Term Durability and Warranty Support

Each part is backed by Rhino-Rack’s strong warranty coverage—crossbars and fit kit with a limited lifetime warranty and legs with a 5-year limited warranty. The black aluminum construction resists wear from weather and time so you can rely on it season after season.

Specs

Dimensions

Crossbar dimensions: 54" long x 1-5/8" wide x 1-7/8" tall
Top channel dimensions: 1-3/8" wide x 5/8" tall x 13/16" opening

Weight and Capacity

Weight capacity: 220 lbs

Color

Color: black

Construction

Construction: aluminum

Warranty

Crossbars: limited lifetime
Legs: 5-year limited
Fit kit: limited lifetime

RB1375B Rhino-Rack Heavy Duty Roof Rack Crossbar - Black - 54" Long - Qty 2

RLKHD Rhino Rack 2500 Series Leg Kit for HD Crossbars

DK330 Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof

Installation Details RR59BP Installation instructions

Alternate Instructions RR59BP Installation instructions

4.6

30646 reviews

5 Stars		(22400)
4 Stars		(6177)
3 Stars		(561)
2 Stars		(791)
1 Star		(717)

by: Jesse 01/05/2025 One Year Later

The Rhino Rack products are top notch and more reasonably priced that "T" or "Y" brands. (I think some accessories may be interchangeable.) I've had both "T" and "Y" racks but I'm now totally sold on the Rhino brand.

Photo attached of four Rhino,Aero bars, towers and ARB awning mounted on my '18 Colorado and Alu-Cab canopy.

My ARB awning fits fine. And the crossbars come in real handy for our canoes and some pairs panel fencing we transported last summer.

As for the staff at etrailer? Well, I'd say they take fantastic care of their customers. Knowledgeable, helpful and they followup, as well.

Etrailer also has amazing HELP videos as well. I bent the crank handle on my trailer tongue jack, which messed up the "internals". I thought Ikd be shelling out for a new Jack, for sure.

Nope. etrailer had a repair kit available (apparently, I'm not the only destroyer of tongue jacks) at a very affordable price and they have an online video to instruct one in the replacement of the innards.

I don't bother with the other accessory or parts sources anymore. I just call these guys and ask what they have. Never have been disappointed, and they enjoy helping.

Click to Enlarge

by: RO 02/05/2017 One Year Later

Nissan Versa

This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.

Click to Enlarge

by: Scott L 03/29/2017

I am normally a exclusive Amazon shopper, but etrailer gives equal or better service and has specialty items you just can't find anywhere else. The pricing is great also. This is my 4th order from them on this project and the response has been perfect and the shipping has been prompt. They even offered to take back an item that I did not need. I desperately wanted to mount my 19ft Kayak on my new RV and with some Rhino RT tracks, a Rhino Nautic kayak lifter, a few really heavy duty rivets, and some ingenuity, I was able to accomplish the task. I am replacing the current Nautic bars with the heavy duty bars. See the attached pictures.

Click to Enlarge

by: Michael 05/31/2022

Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!

Click to Enlarge

by: Rich 08/26/2022

As you can tell by the photo, they never came. Thank you [vendor] for having a tow hitch basket in stock. They saved the day as my other storage option did not arrive, even with the additional $$ paid for faster shipping.

Click to Enlarge

by: Michael 06/27/2024 One Year Later

Great rack. Easy to install. Solid as a rock. I car/truck top various canoes on it and feel safe at highway speeds 80mph+.

Click to Enlarge

by: Mike 08/01/2017

Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short

Click to Enlarge

by: Chris M. 02/06/2019

2008 Nissan Frontier

Great product, fit was spot on with correct vehicle specific parts. Etrailer
was fantastic to work with. Great communication and feedback, worked through a small problem with positive outcome. Will definitely purchase from them again, their customer service department is top notch.

Chris M. One Year Later

2/7/2020

Still going great

by: Bill Boedeker 05/05/2015

2014 GMC Sierra

Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.

Bill B. One Year Later

5/4/2016

Its working well. Hasnt loosened up and has supported the Curt open cargo box with my ham antennas over many mountain roads here in New Mexico.

by: Mason 04/03/2019

Fit great, this setup is great for going to a festival and car camping. Will hold a smittybilt RTT

Click to Enlarge

by: ashley 10/22/2021

I got the roof rack mounted anyways. Better pics to come when it's all finished!

Click to Enlarge

by: Ethan 08/27/2021 One Year Later

High-quality, sturdy rails, but noisy. There was a pronounced and audible whistle driving with these racks at any common road or highway speed (with the rubber inserts installed across the top). I have since replaced these rails with the Rhino vortex aero style (change of vehicles and the HD bars did not fit the new car). Having used both types several times, I would recommend the aero style over the HD if you have the option.

by: Robert 06/01/2018

Chevrolet Colorado

Looks like a very good product for my Chevy Colorado. Went on a shake down cruise with two kayaks and the rails performed very well with my Yakama kayak carriers. The only issue I had was having to adjust the post width by a centimeter or so from the printed recommendations in order to get the best fit with the rubber pads and the rooftop channels. This adjustment was also necessary to get the locking covers to close and lock. Looks like a great product I will use a lot. The quick shipping coordinated by Susan was greatly appreciated.

by: James 01/24/2024 One Year Later

I’ve had this rhino rack for over 3 years and it’s been excellent on long road trips to the ski slopes. A year after my purchase, I realized that I was missing the plastic coverings that attached to the end of the bars and called their customer service to resolve the missing pieces. I was impressed with their quick response and seamless delivery.

by: Gio B 07/15/2020 One Year Later

Very happy with roof rack! It does the job and looks good.

Click to Enlarge

by: Marc M 07/17/2014

2012 Ford Edge

Product installation instructions were fair, and that is the worst thing I have to say. I havent put anything on the rack yet as I just installed it, but I gave a good tug on the bars and they are SOLID. The product came in a reasonable amount of time, and the feedback for etrailer is that I got followup emails at each step of the process keeping me fully informed right up to the message asking for feedback.

Bottomline: etrailer is a great business to work with, and this product seems to be good too.

by: Kenrick 08/03/2020

I was in a roof rack jam. There was a national shortage of the rack I needed for my car and our summer vacation was a week away. I went to etrailer.com when I couldnt find the roof rack anywhere else on the web. Another website actually suggested that they might have what I needed.

I spoke to Ashley E on the phone to make sure that I was picking the right parts. Ashley was very helpful and knowledgable. She helped me find the right roof rack and made sure that I received it in record time. I am a customer for life!!!

by: Philip 08/17/2022 One Year Later

Tricky to rivet tracks onto car with a manual riveter but once done, a great solution for the car with ease of bar removal. My only regret was going with the square bars which result in notable increase in wind noise.

by: James 01/21/2022 One Year Later

This kit is easy to slap on and sturdy enough to balance my skis and snowboards. I recently used the Rhino Rack on a three hour drive to a ski resort and had no issues.

by: Michael 07/30/2022

Instructions are not very clear, otherwise once you figure it out the install is easy.

Click to Enlarge

by: Amanda 06/01/2018

2017 Ford F-150

This rack worked out great... I installed in on a 2017 Ford F-150. We drove 6 hrs through wind and rain with a SUP and Tandem Kayak on top. It really took a beating in a storm the whole way. One bracket was a little loose and shifted because of the wind on the Kayak, but it held together. Super happy with Rhino rack!

by: Larry 10/29/2024 One Year Later

Click to Enlarge

by: Victor 06/02/2023

I received all parts All Instructions were very clear

Click to Enlarge

by: Ricardo 08/19/2018 One Year Later

eTrailer and RhinoRack are the best!
^^^^

by: Rob B 06/26/2019 One Year Later

Dodge Ram Pickup

Well engineered rack that fits my Ram 2500 crew cab well. A bit of wind noise at highway speeds. I have the heavy duty cross pieces with a square cross section.

30646

true

Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack

Do you have a question about this Roof Rack?

Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
view full answer...
Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
view full answer...
Mounting Options for Rhino-Rack Fishing Rod Carrier RR576F
The Rhino-Rack Fishing Rod Carrier # RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel of rack crossbars like # RRVA126B-2 and # RB1375B-2 using the included T-bolt hardware shown in the photo which slide into the top channel of such bars. Only if used in the heavy-duty Rhino-Rack bars is the Fit Kit # HD-FK1 needed. The standard...
view full answer...
What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
view full answer...
Do Rhino Rack Vortex Crossbars Have an Upward Curvature?
The Rhino-Rack Vortex Bars are slightly bowed in the longer bar options to help support the weight when applied to the center of the bar. Most manufacturers have this as a part of the aero bar design. If you want a more straight bar, then you will want to instead use the heavy duty bars like # Y01-120B-NT for the track system or # RB1375B-2 for just the crossbars. There are longer bars like # RB1500B-2 and # RB1650B-2 if desired.
view full answer...
Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
view full answer...
Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
view full answer...
Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
view full answer...
Affordable Way To Carry A Kayak On A 2010 Hyundai Sonata
I have an affordable solution for you, however, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54" Long - Qty 2 # RB1375B-2 is not a fit for your 2010 Hyundai Sonata and even if it was, you would need to also buy a few other parts to fit it onto a vehicle so it would not be the price you were looking at. For your vehicle with a naked roof, the SportRack Semi-Custom Roof Rack 50" # SR1002 is going to be your best option. This square bar roof rack includes everything necessary...
view full answer...
Tonneau Cover and Rack Options for 2007 Honda Ridgeline
The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
view full answer...
Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
view full answer...
Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
view full answer...
Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
view full answer...
Are There Rails Available For Installing a Roof Rack on a Vehicle
We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
view full answer...
Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
view full answer...
Using a Rhino-Rack Roof Rack to Go Off-Road on a 2016 Chevrolet Colorado
The Rhino-Rack ROC25 Vortex # RR93GR is an aerodynamic, low profile rack. I verified with Rhino-Rack that the bars are just as strong as the Rhino-Rack heavy-duty racks, however since the bars fit directly into the feet and do not have any over hang there is more weight being forced directly down onto the center of the bars and less weight being distributed across them. For a more rugged roof rack I suggest the 2500 Heavy-Duty Rack that consists of the 54 inch crossbars # RB1375B-2, the...
view full answer...
Recommended Rhino-Rack Crossbars that fit a 2017 Ford C-Max
I believe the measurement you're looking at is referring to the HD Bars # RB1375B-2 which you don't have, however I can say with certainty that the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars # RR25SR will fit your 2017 Ford C-Max just fine. The front crossbars measure 43-9/16" long x 3-1/8" wide x 1-3/16" tall, and the rear crossbars measure 41-3/8" long x 3-1/8" wide x 1-3/16" tall.
view full answer...
Roof Rack for 2009 Jeep Wrangler Unlimited With Aftermarket Hard Top to Transport 2 Kayaks
The roof racks that we offer for the 2009 Jeep Wrangler Unlimited, such as the Rhino-Rack System consisting of parts # RB1375B-2, # RLT500 and # RTC95JW, are intended for use on the OEM hardtop. This system when mounted on the factory hardtop has a maximum cargo weight capacity of 65-lbs. This limit is not a function of the rack materials, but rather the capacity of the OEM roof, and therefore is the same for all other roof racks we offer for your Wrangler. Without knowing the brand and...
view full answer...
Can Rhino Rack Square Bars Be Cut Down To Fit A 2014 Scion xB
For a 2014 Scion xB we recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2, which are 54" in length. As for cutting down longer Rhino Rack square bars, which I don't recommend, you would need a miter saw with a metal cutting blade and could cut the bars to your specific needs. The end caps would need to be removed first so that you could add them on once you finish cutting. You'll also want to paint any exposed metal after cutting. If you need the mounting hardware for...
view full answer...
What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
view full answer...
Roof Rack for 2014 Chevy Silverado 2500 that Could Have Tepui Tent Installed
I looked up the Tepui Tents and they basically attach to roof rack crossbars like the Rhino Rack roof rack part numbers # RB1375B-2, # RRRLKHD, and # DK227 that you referenced. The only issue you may encounter is that this rack has a weight capacity of 130 lbs.
view full answer...
Track Mount vs. Fixed Mount Rack For Tonneau Cover on 2021 Ford F-150
Those are good questions, and you will indeed lose quite a bit of functionality going with a fixed rack system compared to a track mounted rack. The reason for that is simply that you'll have the ability to move the crossbars to accommodate whatever it is you need to carry, and depending on what that accessory may be, it won't be able to mount unless your crossbars have a specific spread distance. There is not a desired optimum spacing, that is completely up to you and what you are looking...
view full answer...
2013 Pathfinder Naked Roof Roof Rack Recommendation
For your 2013 Nissan Pathfinder the Sportrack Semi-Custom roof rack part # SR1002 has not been confirmed to fit your vehicle, BUT I do have a similar roof rack that would work for you. Instead you would want the Rhino Rack roof rack that consists of part numbers # RB1375B-2 and # CXB if you are looking for the most economical roof rack option around.
view full answer...
Half Rhino-Rack HD Roof Rack for a 2015 Chevy Colorado Crew Cab with Naked Roof
In order to get half of a Rhino-Rack roof rack for your 2015 Chevy Colorado we just have to piece together the parts. For a single bar you will need # RB1375B. For just 2 feet instead of 4 you will need # RRRLKHDH. And you will need custom clamp kit, # DK330, which is all 4 of the clamps and pads but they are not available individually so you would have to get the whole kit and just use 2 of them.
view full answer...
Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
view full answer...
What Is The Load Bearing Capacity Of The RRRLKHD Legs And DK498 Fit Kit?
Hello Larry, thanks for reaching out. The Rhino-Rack 2500 Series Legs # RRRLKHD have a 165 lb capacity. The # DK498 does not have a specific capacity assigned to it, meaning the capacity will be determined by the legs, so 165 lb capacity. As with any roof rack system, make sure you observe your vehicles maximum roof load capacity.
view full answer...
Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
view full answer...
Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
view full answer...
Are Feet and Fit Kit Available for Rhino Rack HD Rack RR28DP for Silverado
Hey Jonathon, we do have just the replacement feet of the # RR28DP available with the part # RRRLKHD and the fit kit # DK427. I'd definitely brag to your wife how much money you saved just getting the feet and reusing your current bars haha.
view full answer...
Using Rhino Rack 50 Inch Crossbars on 2011 Honda Accord
You can certainly use 50 inch load bars on your Accord. Rhino Rack offers a Heavy Duty rack system that uses 50 inch load bars. You can assemble a system by using the following parts: Heavy Duty 50 Inch Crossbars, part # RB1250B-2 Leg Kit, part # RRRLKHD Vehicle Specific Clamp Kit, part # DK184 The rack has a 110 lb capacity, which might be limited by the capacity of your Accord's roof if it is less.
view full answer...
Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
view full answer...
Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
view full answer...
Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
view full answer...
Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
view full answer...
Can I Carry Two Kayaks Side by Side on My Roof Rack?
The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
view full answer...
Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
view full answer...
Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
view full answer...
Rhino-Rack HD Roof Rack Fit For 2022 Honda Ridgeline With Naked Roof
We do indeed have the Rhino-Rack roof rack with HD crossbars that fits your 2022 Honda Ridgeline with a naked roof, and load stops as well. The correct parts for your truck are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver # RB1500 or Black # RB1500B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit # DK470 This will give you the heavy-duty Rhino-Rack roof rack for your '22 Ridgeline, and then for load stops for these crossbars,...
view full answer...
Carrying Plywood Sheets on a 2011 Subaru Forester
I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
view full answer...
Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
view full answer...
How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
view full answer...
How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
view full answer...
Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
view full answer...
Recommended Heavy Duty Roof Rack for 2016 Ford F-150
I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
view full answer...
Mounting the Rhino-Rack Batwing Awning to a 2013 Toyota Tacoma
The Rhino-Rack Batwing Awning, # RR33200 is designed to bolt to a Rhino-Rack Pioneer platform or crossbars with top channels, using hardware sold separately. For your 2013 Toyota Tacoma, you will need the Batwing and Foxwing Awning Relocation Kit for Rhino-Rack Heavy-Duty Crossbars, # RR31102 and note that this awning is only compatible with crossbars that extend past the roof rack's legs. I suggest the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54", # RB1375B-2 with the Rhino-Rack...
view full answer...
Tonneau Cover and Rack Options for 2007 Honda Ridgeline
The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
view full answer...
Recommended Roof Rack for 2016 Mitsubishi Outlander Sport
It sounds like your wife's 2016 Mitsubishi Outlander Sport is equipped with factory flush rails that run front to back on the roof without any crossbars. Just let me know if this is not correct. If this is the case then we do have a nice selection of roof rack crossbars that are confirmed to fit but they are all designed to still mount at specific locations along the side of the roof. There is not a roof rack available for your vehicle that will let you adjust the feet front to back to...
view full answer...
Roof Rack Recommendation for 2010 Toyota Corolla with Naked Roof for Snowboard Carrier
For your 2010 Toyota Corolla sedan with a naked roof we have the 2010 Toyota Corolla Roof Rack by Rhino Rack which includes part numbers # RB1250B-2, # RRRLKHD and # DK152 as a confirmed fit which would work great for a snowboard rack like the Rhino Rack # RR574 which can carry up to 4 pairs of skis or 2 boards.
view full answer...
Sliding Ladder Rack that Fits 2017 Chevy Colorado 5 foot Bed
For your 2017 Chevy Colorado 5 foot bed we have the TruXedo Elevate Truck Bed Sliding Ladder Rack part # TX86NV as a confirmed fit that would work great. It's also adjustable in height and compatible with tonneau covers like the Extang Xceed # EX85350.
view full answer...
Mounting Rhino Rack Bars on a 2018 GMC Canyon
The Rhino Rack bars will all install using a clamp system that connects to your vehicle around its door jamb. For your vehicle, I recommend the custom length bars, part # RR93GR for the Crew Cab variant and part # RR28GR for the Extended Cab version. This will give you a factory look on the vehicle, while providing improved functionality through its channel mounts and bars. Both of these kits are all-in-one kits and require no additional purchases or foot packs to install.
view full answer...
Roof Rack & Surfboard Carrier For 2021 Chevy Colorado Crew Cab
I'm not sure if your 2021 Chevy Colorado Crew Cab already has a roof rack for a surfboard carrier or not, so let's start with the roof rack you'll need, which will depend on if you have a bare roof or raised side rails. Raised Side Rails - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails # RRSX100 Bare Roof - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit...
view full answer...
Can Thule Fit Kit For 2021 Chevy Colorado be Purchased by Itself
So while just the brackets alone cannot be purchased, the fit kit for your 2021 Chevy Colorado can. But we definitely want to make sure what you get is compatible with your current Thule rack. If you have the latest Thule foot, called the Evo, then you can get the fit kit, with the correct one for your 2021 Chevy Colorado being the Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145179. I know that sometimes it can be hard to determine what you have, especially if it's older,...
view full answer...
Recommended Cross Bars on 2022 Chevrolet Colorado Crew Cab
I suggest the Rhino-Rack Vortex Aero Crossbars, # RRVA126B-2 mounted with the Custom DK Fit Kit, # DK330 and Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars, # RRRLKVA. These full-length bars provide plenty of space for carriers and accessories and the vortex strips in the C-channels reduce wind noise. These crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories. They are made of structural-grade anodized aluminum with...
view full answer...
Are There Fixed Mounting Point Roof Racks For A Naked Roof 2019 Chevy Colorado
For naked roofs like your 2019 Chevy Colorado the only option would be to use a clamp-style roof rack that would grip onto the door jamb to secure the feet for your crossbars. On some vehicle the manufacturer will put fixed mounting points in the channel you're referring to, but Chevy did not in this case. If you're looking for a quality roof rack that won't break the bank then I would go with Rhino Rack and get the following components: Rhino-Rack Vortex Aero Crossbars - Aluminum -...
view full answer...
Recommended Roof Rack for a Hullavator on a 2020 Chevy Colorado Crew Cab
The best option for a roof rack on your 2020 Chevy Colorado Crew Cab is going to be the Roof Rack by Rhino Rack. This rack is also compatible with the Thule Hullavator Pro Kayak Carrier item # TH898. The Hullavator does require longer crossbars to allow the kayak to be lowered down 36" for easy loading and unloading. You will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars...
view full answer...
Using a Rhino-Rack Roof Rack to Go Off-Road on a 2016 Chevrolet Colorado
The Rhino-Rack ROC25 Vortex # RR93GR is an aerodynamic, low profile rack. I verified with Rhino-Rack that the bars are just as strong as the Rhino-Rack heavy-duty racks, however since the bars fit directly into the feet and do not have any over hang there is more weight being forced directly down onto the center of the bars and less weight being distributed across them. For a more rugged roof rack I suggest the 2500 Heavy-Duty Rack that consists of the 54 inch crossbars # RB1375B-2, the...
view full answer...
Roof Rack for 2017 Chevy Colorado Crew Cab with Naked Roof
While we have some good options for a roof rack on your 2017 Chevy Colorado Crew Cab with a naked roof, the Rhino-Rack tracks will only fit Rhino-Rack feet so they aren't compatible with your current Yakima towers. The best option is a roof rack from Rhino-Rack that does not require drilling to install tracks in your roof and is also more budget-friendly than using your Yakima bars with a track system. It would require the following: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 -...
view full answer...
Rhino Rack Vortex Roof Rack that Fits 2021 Chevy Colorado
The Rhino Rack Vortex Aero Crossbar kit that fits your 2021 Chevy Colorado is part numbers # RRVA126B-2, # RRRLKVA, and # DK330 which is the foot pad. Your Ford Edge actually used a longer crossbar so if you aren't pressed for time to use this rack you could try using just the different foot pad but if you find that the bar length just doesn't work you could then go with the different bar. The feet are the exact same.
view full answer...
Rhino Rack Roof Rack that Fits 2016 Chevy Colorado
We have roof racks that fit your 2016 Chevy Colorado like the Rhino Rack roof rack part numbers # RRVA126B-2, # RRRLKVA, # DK330 but we aren't able to get an Inno rack that fits your truck.
view full answer...
Roof Rack and Paddleboard Carrier Recommendation for 2019 Chevy Colorado
For your 2019 Chevy Colorado with a naked roof the roof rack I recommend is the Rhino Rack part numbers # RRVA126B-2, # RRRLKVA, and # DK330 because it has aero shaped bars which means the rack will be quieter, the rack installs easily and because it has the same higher quality as the more expensive racks but costs considerably less. For a paddleboard carrier I then recommend the Thule SUP taxi part # TH810001 because it can carry up to 2 boards, is easy to install, and is adjustable...
view full answer...
Can Two Malone Downloaders Fit on Rhino Rack Roof Rack that Fits 2016 Chevy Colorado
Two Malone Downloader Kayak Carriers # MPG114MD could fit on the Rhino Rack Vortex Aero Roof Rack # RRVA126B-2, # RRRLKVA, and # DK330. Since the Downloader is a J-style kayak carrier and the boats are held at an angle it frees up quite a bit of space for fitting more than one carrier.
view full answer...
Ladder Rack and Tonneau Cover Combination for 2018 GMC Canyon Crew Cab Long Bed
Tonneau covers like your OEM model 84203262 which covers your bed rails and stake pockets prevent using a ladder rack since there are no accessible mounting points to install one. To add cargo carrying capacity to your Canyon we do have roof racks for the cab. For a quiet aero-style rack for a Crew cab with bare roof we have a great value rack from Rhino-Rack, their black Vortex system made of parts # RRVA126B-2, # RRRLKVA and # DK330. This rack gets you a 165-lb load rating and it costs...
view full answer...
Can Spacing of Rhino Rack Roof Rack for 2016 Chevy Colorado be Adjusted
With naked roof roof rack installs like the Rhino Rack # RRVA126B-2, # RRRLKVA, and # DK330 you have installed you have to stick with the recommended crossbar spacing. This spacing is where the roof is reinforced the best to carry the weight so if you move the rack around it's possible you could damage the roof.
view full answer...
Half Roof Rack Kit for a 2017 GMC Canyon to Carry a Canoe
To get the half kit, you'll need to individually purchase the following kit: Rhino-Rack Vortex AeroBar, part # RRVA137B Half Pack 2500 Series Vortex Legs, part # RRRLKHDH Custom Fit Kit for 2500 Series Legs, part # DK330 The only trouble you'll run into is that the DK330 kit isn't available as a half-pack.
view full answer...
Half Rhino-Rack HD Roof Rack for a 2015 Chevy Colorado Crew Cab with Naked Roof
In order to get half of a Rhino-Rack roof rack for your 2015 Chevy Colorado we just have to piece together the parts. For a single bar you will need # RB1375B. For just 2 feet instead of 4 you will need # RRRLKHDH. And you will need custom clamp kit, # DK330, which is all 4 of the clamps and pads but they are not available individually so you would have to get the whole kit and just use 2 of them.
view full answer...
Longer Crossbar Roof Rack that Fits 2022 Chevy Colorado
The crossbars of the Rhino Rack and other roof racks that fit your 2022 Chevy Colorado don't have channels on the underside that run the full length of the bar. Since this is what the rack uses to attach to the feet of the rack it means you can't use longer bars as the feet won't attach. So the best option would be the 54 inch long Rhino Rack HD bar system part numbers # RB1375, # RRRLKHD, # DK330 which is the longest bar setup that fits your truck.
view full answer...
How Much Height Does Rhino-Rack Roof Rack Add to 2016 Chevy Colorado Crew Cab w/ Naked Roof
When installed on your 2016 Chevy Colorado Crew Cab with a naked roof, the top of the Rhino-Rack roof rack will add 5-1/4 inches of overall height. You have made a superb choice with the Rhino-Rack because it is easily the best value for a roof rack for your truck. The Rhino-Rack has the same high quality as similar name brands, but at a friendlier price point. By going with this option, what you are getting is a durable, quiet roof rack without having to pay just to have a specific brand...
view full answer...
Rhino-Rack Black Aero Roof Rack for 2018 GMC Canyon Crew Cab
For your 2018 GMC Canyon crew cab with a bare roof I can suggest the Rhino-Rack black Vortex Aero roof rack system made of parts # RRVA126B-2, # RRRLKVA and # DK330. This sleek aero style rack will be quieter than all other roof bar shapes and offers a 165-lb weight rating. It is shown in the linked video.
view full answer...
Roof Rack Recommendation for 2017 GMC Canyon Crew Cab with Naked Roof
For your 2017 GMC Canyon with a naked roof we have the Rhino Rack roof rack part numbers # RRVA126B-2, # RRRLKVA, and # DK330 which is a confirmed fit and would work well.
view full answer...
Can Thule Accessories Be Used With Rhino-Rack Heavy-Duty Crossbars On 2019 Chevy Colorado
The majority of roof mounted accessories won't work with the Rhino-Rack Heavy-Duty Roof Rack Crossbars for the exception of select Rhino Rack accessories using adapters. The reason for this is because the size of the crossbars are simply too large. Therefore, you' be much better off using a more standard size crossbar. The Rhino-Rack Vortex Aero Crossbars System is a better option. In order to use the Rhino-Rack Vortex Aero Crossbars System on a 2019 Chevrolet Colorado you'll need part...
view full answer...
Roof Racks for 2016 GMC Canyon Crew Cab
My contact at SportRack confirmed that their Mondial roof rack is no longer supported with replacement parts (due to its age) but we can help you select a new roof rack for your 2016 GMC Canyon crew cab. On the linked page you'll see all available brands and styles of roof racks made for your Canyon crew cab. These include basic round and square bar racks as well as the quieter aero style racks from Rhino-Rack. For a black bar aero setup you might consider the Vortex Aero rack made of...
view full answer...
Is There a Roof Rack for a 2020 Chevy Colorado ZR2 Extended Cab Without Clips?
The only style of roof racks available for your 2020 Chevy Colorado ZR2 extended cab are clamp on. If your vehicle has the factory raised rails that run front to back then we have the Rhino-Rack Roof Rack which uses 49" Rhino-Rack Vortex Aero Crossbars # RRVA126B-2, and Rhino-Rack SX Series Legs # RRSX100. If your vehicle does NOT have the factory raised rails then I recommend going with the Rhino-Rack Roof Rack which uses the same 49" Rhino-Rack Vortex Aero Crossbars # RRVA126B-2, but...
view full answer...

< Previous

Next >

Do you have a question about this Roof Rack?

Info for this part was:

Updated by:

Wilson B

Updated by:

Alex H

Updated by:

Michael B

Edited by:

Daron K

Written by:

Lincoln B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.